Stiebel Eltron Tempra 29 Trend Tankless Water Heater
Let us help you evaluate if tankless is right for you or help you select the best model for your application. Call us now...
See an internal view of the Stiebel Eltron tankless water heater - learn how it works and what makes it superior to the competition.
(Click the picture)
Stiebel Eltron Tempra Series Brochure
Electrical Requirements & Installation Information
Stiebel Eltron Tempra 29 Trend (White)
Our Price: CDN$873.75
You save: $249.25
Found a Lower Price?
Request a Price Beat
Choose Refurbished 2nd Gen (Grey)
Limited Quantity of Factory Refurbished units available.
Save an additional $224.75!
- more info -
The new Tempra 29 Trend replaces the discontinued Tempra 29B.
It offers all the same features of the Tempra 29B, with a new digital display, in a modern white powder-coated case.
- Digital Display
- 28.8 kW's of Power
- Thermostatically Controlled
- Requires 200 Amp Service
Like all Tempra Trend tankless water heaters, the Tempra 29 Trend features true microprocessor-controlled temperature regulation, a digital display, and a dial selector which allows you to set the desired output water temperature at any level between 86 and 140F (30 and 60C). It is one of the only tankless water heaters on the market that features a true thermostatic temperature control and full power-modulation based on both the incoming water temperature and the water flow rate.
The Tempra 29 Trend will automatically adjust its power output to accommodate changes in the incoming water temperature and flow rate so it can precisely maintain the desired output temperature. The result is the most precise temperature control of any tankless water heater on the market today!
|Maximum Flow Rate in Gallons Per Minute at 105°F Output temp|
|Incoming Water Temp:||Flow Rate (GPM)|
Please review the Stiebel Eltron Tempra Brochure
for temp rise data at 208v input.
|Stiebel Eltron Tempra 29 Trend Specifications|
|Thermostatically Controlled?||Yes, temperature control with full power modulation based on flow rate and incoming water temperature.|
|KW||28.8 KW @ 240v / 21.6 KW @ 208v|
|Voltage:||208 - 240 volts / single phase / 50 - 60 Hz|
|Max. Amps:||120 AMPS @ 240v / 105 AMPS @ 208v|
|Breakers Required:*||3 x 40 AMP breakers (depends on local codes)|
|Wiring:*||Minimum 3 x #8 AWG Copper (depends on local codes)|
|Dimensions:||16.6 x 14.5 x 4.6" (42.0 x 36.8 x 11.7 cm)|
|Weight:||17.6 lbs (8.6 KG)|
|Pipe Fittings:||3/4" NPT|
|Activation Flow Rate:||0.77 GPM /2.9 LPM|
|Max. Water Pressure:||150 psi (tested to 300 psi)|
|Warranty:||7 years against leakage / 3 years against defects in workmanship & materials|
|Safety:||ETL Listed (US & Canada) - meets all applicable standards, including ANSI/UL 499 (USA) and CSA-E335-1/3E-94 (Canada)|
|Protection:||microprocessor-based thermostatic temperature control (flow rate and temperature modulating) with thermal hi-limit cut-out switch monitoring each heating module|
* Breaker size and wire gauge must meet all applicable local, state, provincial, and national electrical codes for your area - these are only guidelines that will apply to most installations. Some codes require use of electrical sub-panel for installation, especially when heater is not mounted within line-of-sight of the main electrical panel. Wiring should be sized to maintain a voltage drop of less than 3% under load. Please consult your electrician for more details.
Please note: A minimum 200 AMP household electrical service is highly recommended and will likely be required to install this model. If you are unsure of your electrical capacity in your home, please consult your electrician or contact us for assistance before ordering.
Stiebel Eltron Tempra 29 Trend (White) Reviews
Tempra 29 Tankless Heater
Simple to install (already had electrical in place), performs as advertised. So far, very pleased.
- Bob P
All Stiebel Eltron Tempra and Tempra Plus tankless water heaters are ETL Listed in the USA and Canada, ensuring they conform to all applicable safety standards.
All Stiebel Eltron Tankless Water Heaters are tested and certified by WQA against NSF/ANSI 372 for "lead free" compliance.
Comprehensive 7 year manufacturer's warranty against leakage / 3 year against defects in workmanship & materials. See warranty for details
Stiebel Eltron is: