Stiebel Eltron Tempra 29B (2nd Gen) - Refurbished
Limited Stock Remaining, Only Available While Supplies Last
This is a factory refurbished unit. It has been refurbished to the original specifications by Stiebel Eltron and tested to ensure that it matches all performance characteristics as a new model. It is backed by a 1 year manufacturer's warranty and available at a large discount while stock lasts.
Let us help you evaluate if tankless is right for you or help you select the best model for your application. Call us now...
See an internal view of the Stiebel Eltron tankless water heater - learn how it works and what makes it superior to the competition.
(Click the picture)
Stiebel Eltron Tempra Series Brochure
Electrical Requirements & Installation Information
Stiebel Eltron Tempra 29B (Grey) Refurbished
Our Reg. Price: $
Sale Price: US$379.00
You save: $237.00
Found a Lower Price?
Request a Price Beat
The Tempra 29B was the predecessor of the Tempra 29 Trend. It offers all the same features of the Tempra 29 Trend except for the digital display. It comes in a grey case instead of the white associated with the Tempra Trend series.
- 28.8 kW's of Power
- Thermostatically Controlled
- Requires 200 Amp Service
Like all Tempra B series tankless water heaters, the Tempra 29B features true microprocessor-controlled temperature regulation and a dial selector which allows you to set the desired output water temperature at any level between 86 and 140F (30 and 60C). It is one of the only tankless water heaters on the market that features a true thermostatic temperature control and full power-modulation based on both the incoming water temperature and the water flow rate.
The Tempra 29B will automatically adjust its power output to accommodate changes in the incoming water temperature and flow rate so it can precisely maintain the desired output temperature. The result is the most precise temperature control of any tankless water heater on the market today!
|Maximum Flow Rate in Gallons Per Minute at 105°F Output temp|
|Incoming Water Temp:||Flow Rate (GPM)|
Please review the Stiebel Eltron Tempra Brochure
for temp rise data at 208v input.
|Stiebel Eltron Tempra 29B Specifications|
|Thermostatically Controlled?||Yes, temperature control with full power modulation based on flow rate and incoming water temperature.|
|KW||28.8 KW @ 240v / 21.6 KW @ 208v|
|Voltage:||208 - 240 volts / single phase / 50 - 60 Hz|
|Max. Amps:||120 AMPS @ 240v / 105 AMPS @ 208v|
|Breakers Required:*||3 x 40 AMP (240 volt, double pole breakers)|
|Wiring:*||Minimum 3 x #8 AWG Copper|
|Dimensions:||16.6 x 14.5 x 4.6" (42.0 x 36.8 x 11.7 cm)|
|Weight:||17.6 lbs (8.6 KG)|
|Pipe Fittings:||3/4" NPT|
|Activation Flow Rate:||0.77 GPM /2.9 LPM|
|Max. Water Pressure:||150 psi (tested to 300 psi)|
|Warranty (Refurbished):||1 year manufacturers warranty against defects in workmanship & materials|
|Safety:||ETL Listed (US & Canada) - meets all applicable standards, including ANSI/UL 499 (USA) and CSA-E335-1/3E-94 (Canada)|
|Protection:||microprocessor-based thermostatic temperature control (flow rate and temperature modulating) with thermal hi-limit cut-out switch monitoring each heating module|
* Breaker size and wire gauge must meet all applicable local, state, provincial, and national electrical codes for your area - these are only guidelines that will apply to most installations. Some codes require use of electrical sub-panel for installation, especially when heater is not mounted within line-of-sight of the main electrical panel. Wiring should be sized to maintain a voltage drop of less than 3% under load. Please consult your electrician for more details.
Please note: A minimum 200 AMP household electrical service is highly recommended and will likely be required to install this model. If you are unsure of your electrical capacity in your home, please consult your electrician or contact us for assistance before ordering.
Other Tempra Trend Series Reviews
We love our Stiebel Tempra 20. Have paired it with a Hague water softener and are very pleased with the result. - Sandpiper
Tankless water heater
Good product, had previously purchased from Tankless in Florida, which worked well for 8 years. Installation not to difficult, following the instructions. I chose product for good price and European experience with good workmanship. hope this one will last long. - Roger
tankless hot water heater
I got it very fast and we replaced our old one of many years, It works great, no problems. - john c
Tempra 29 Tankless Heater
Simple to install (already had electrical in place), performs as advertised. So far, very pleased. - Bob P
Installed the unit according to the directions and it did not work at first. I think because the water pressure needed time to reach normal in the unit. It now works fine to heat our master bath fixtures - Stephen K
E Tankless Water Heater
Love it, works great & company very helpful when ordering. - Janice
All Stiebel Eltron Tempra and Tempra Plus tankless water heaters are ETL Listed in the USA and Canada, ensuring they conform to all applicable safety standards.
All Stiebel Eltron Tankless Water Heaters are tested and certified by WQA against NSF/ANSI 372 for "lead free" compliance.
Comprehensive 7 year manufacturer's warranty against leakage / 3 year against defects in workmanship & materials. See warranty for details
Stiebel Eltron is: